PLC Students Comments
THANKYOU WEBSAYURA TEAM !!! Special thanks goes to Eng.Budhdhika Weerasekara who conducted a valuable course program for multiple sessions for help to gain most of the knowledge in PLC & Pneumatic systems . Also privately guided solving the problems I had . and I would like to recommend this course for all the people new to automation and who are interested in this subject.
Gayanthi Charuni Wimalasooriya
Electical & Electronic Engineering SLIATE- GALLE
I should thank the lecturer Eng.Budhdhika Weerasekara for this program for sharing the knowledge and guidance provided. On the same note If you are a electrical or mechanical student who is looking forward to sharpen the techincal aspects of the carrier this is definitely for PlC
programming which will put you in the right track. Thankyou Websayura!
M.G Ishara Lakshitha Bandara
HNDE (ATI - Galle) / Department of Electrical and Electronics Engineering
I actually learned a lot from this basic plc & pneumatic systems program. This valuable course from websayura academy great help to me. It is a very valuable course for all of us who are looking forward to a job.
R.M Sajini Janaki Nugegoda
Ocean University of Sri Lanka
This is very valuable course and I gain lot of knowledge. Actually, lecturer has used very simple method to teaches us to software and other explanations. Thank You Sir
Loku Edippulige Kosala Meriyan Waruni
Department of Mechanical and Manufacturing Engineering, University of Ruhuna
This is an excellent online course. At the beginning of this course, I hadn't a clear knowledge
about PLC programming. But now I have a good knowledge about basic PLC programming and
pneumatic systems. Also, I knew importance of industrial automation. I highly recommend this
course for anyone who are interested in automation. My special thank goes to Eng.Buddhika
Weerasekara who conducted the course. He explained whole content clearly and deeply. I would
like to thank websayura academy.
M.D.J.Kaushalya
Department of Mechanical and Manufacturing Engineering,
Faculty of Engineering, University of
Ruhuna
This is a highly valuable short course that covers the principles of industrial automation in order to prepare for industrial requirements. I had no prior experience in pneumatics control, but after completing the course, I would be able to gain a better understanding of the subject. It would also be helpful if it included the pneumatic calculation and described how to approach and require accessories for the real-time industrial solution based on the calculation. By the way, I’d want to express my gratitude for the excellent course. I’m eagerly waiting to enroll in the next advanced course.
Panagodage Randika Sampath Jayasekara
DPMC
I recommend this course as a very important and essential one for anyone who is looking to study or work in automation related field. Well organized with many practical explanations guided by a well experienced teacher in automation and engineering field.
Chinthana Jayasekara
Department of Mechanical and Manufacturing Engineering University of Ruhuna.
Here, I studied from the very basics. In my opinion this the best one. So that anyone can follow this course without any suspicion. This is highly recommended.
Thadisha Dilmini Jayamaha
Ocean University Of Sri Lanka, Department of Marine Engineering
This is the most valuable course to study PLC & Pneumatic. We can improve our knowledge with write & create a program from A to Z. I say it with confidence this is the most valuable course to stay anyone with zero knowledge in plc & pneumatic. Thank you sir for all your guidance & lectures.
K.W.Bimali Shashinika De Silva
Visiting lecturer at College of Technology
Great pleasure to attend to this Websayura course.And also a wonderfull & interesting course lectures include in this course.As well as the Lecturer is superb.Thanking so much for him to improve our knowledge. Thank You
S.A.T. Lakranjana
HNDE(Labuduwa)- Mechanical Engineering
Very understanding method of teaching. As a beginner to this subject area we got a big amount of knowledge about PLC programming and Pneumatics. Thank you very much Buddika sir for your knowledge sharing and the Websayura institute for providing this valuable opportunity.
Bhashitha Dilshan Wijerathne
Ocean University Of Sri Lanka, Department of Marine Engineering
“ගොඩක් හොදින් PLC and Pneumatic part eke හැමදෙයක් ගැනම අවන්කවම හොදට සර් කියල දුන්නා. Pneumatic, campus එකේ කරල තිබුනත් හොදටම ඇගට වැදුනා මේ Corse එකෙන්. Interview එකකට ගියත් දැන් බයක් නැතුව Face කරන්න පුලුවන්. Mechatronics Degree eka කරද්දි මට අනිවාර්යයෙන් මේ course එක ලොකු ගැම්මක් වෙන්වා කියලා sure. අනිත් එක online කරා උනාට sir 24 hours අපි අහන ඕනම Question එකකට answers එව්වා. Robotics ගොඩ දැම්මෙත් sir. PLC and Pneumatic එකත් දැන් complete. ගොඩාක් Thanks Sir
H.B.A Ganindu Avishka
University collage matara (Engineering department )
First of all, it s a great honor to be a participant in this online course. I learned a lot about PLC
programming & Pneumatic System and also I could learn some wonderful software those can be
used in industrial automation. At first I knew nothing. But after following this course I learned a
lot. Thank you all.
E Chathura Sri Sampath Ananda
South-Eastern University of Sri Lanka
“නියමාකර ලෙස ක්රමානුකූලව පෙලගැස්මක් සහිතව පාඨමාලව හැදෑරීමට අවකාශ ලැබුන අතර PLC පිලිබඳව මූලීක දැනුමක් මෙන්ම අවබෝධයක් ලබා ගන්නට හැකි විය.”
Thineth Kanchana Liyanage
University of Ruhuna
Faculty of Engineering, Department of Mechanical and Manufacturing
Engineering
A very interesting and valuable course. over the duration of the PLC course, I gained a lot of knowledge and practical strategies that would be beneficial to me, and Buddhika Sir gave us a good grounding in the basics of the PLC and pneumatic systems. Thank you Sir and websayura Team!
A.A.K.P.Suraweera
HNDE-Colombo, Department of Mechanical Engineering
“In this online course, Eng.Buddhika teach us basic PLC and pneumatics beyond the traditional textbook – for an online class, I think that;s pretty amazing! The course is well-structured, and the assignments will enhance your understanding of each weeks topics. Eng. Buddhika
communicates regularly and gives you a reference point so you know where you should be in the course in terms of your readings and assignments. This course is a lot of work – be prepared to manage your time wisely – its time well spent!”
M.S.S. Muthuthantri
Department of Mechanical & Manufacturing Engineering,
Faculty of Engineering,
University of
Ruhuna.
A Highly Recommended online PLC course. Well Explained Throughout the course.
R.M.C.D.B. Ranasingha
South Eastern University of Sri Lanka
“Excellent. I got huge knowledge from this course about plc and pneumatic.”
Janith Shehan Rathnayaka
Ocean University of Sri Lanka
“It was a great experience for me to learn from an industrial experienced lecturer in sinhala medium. I learnt well about PLC as well as the field. Lecture materials are well designed which can be understood easily. All lectures are very important. Thank you sir for organizing this kind of course for students. Thank you websayura organization. I’m waiting for more courses related to mechanical engineering from websayura.”
N. G. Amith Weerasena
University of Ruhuna
Faculty of Engineering, Department of Mechanical and Manufacturing
Engineering
This is best course which is started from basics. Course is conducted very clearly. If anyone interest automation side, He or She can follow this.
Vimukthi Pramuditha
Ocean University of Sri Lanka
“It is really good opportunity for us to have some experience on practical examples which are widely available in the industry in PLC and pneumatic field as well.”
Madushanka H.H.H.L.
Faculty of Engineering
University of Ruhuna
“As a person with no knowledge in the field of automation, I found this course very informative and helpful. I really liked the way the course was presented online. Every small detail was discussed, and I really admire Buddhika Sir’s dedication towards explaining every detail we wanted. I wish to continue more courses if they are available in the future. Thank you websayura for the wonderful and knowledgeable lectures carried out!”
Miron Francisco
University of Ruhuna
Faculty of Engineering, Department of Mechanical and Manufacturing
Engineering
Before participating in this course, I had zero knowledge of PLC, Ladder logic and Pneumatic even though I have learnt Arduino and some other Programming languages but, now I have some knowledge of PLC and Pneumatic. It will be a great help for my future career.
Thilkarathna D.M.S.K.
University of Ruhuna
Faculty of Engineering, Department of Mechanical and Manufacturing
Engineering
Lecturer was punctual. Learning area was well covered. Thankyou all.
Dasanayaka S.V.
University of Ruhuna
Faculty of Engineering, Department of Mechanical and Manufacturing
Engineering
Very interesting course so far, within short time period have been learning lot of information.
Prabodha Fernando
Mechanical and Manufacturing Engineering, Faculty of Engineering, University of Ruhuna
Very good guidance obtained from the lecturer
Janith Prabhanuka
South Eastern University
This course was very effective to get basic and understand about PLC. Even though this course had short time period we got more details and sir taught us every point step by step clearly. Thank you sir.
A. A. Yumesha Madhumani Damayantha
University of Ruhuna, Faculty of Engineering
its very helpful,well conducted thank you very much sir
H G D N Abeyrathna
Ocean university of srilanka
Really helpful to uplift the knowledge
Udayanga Y.L.G.D.N
Faculty of engineering, University of Ruhuna
“Actually, this course is very valuable for the beginners of the Automation field. Well explaining with using many practical applications of the field. Thank You!”
S.A.L. Yomal Serasinghe
University of Ruhuna
Faculty of Engineering, Department of Mechanical and Manufacturing
Engineering
“I got knowledge about PLC and it is an excellent course.”
Priyadarshani K.N
University of Ruhuna
Faculty of Engineering, Department of Mechanical and Manufacturing
Engineering
Good and very useful course
R.A.I.S. Rajapaksha
University of Ruhuna
Faculty of Engineering, Department of Mechanical and Manufacturing
Engineering
This course is very well, and teaching style is very well. thank you for improver my knowledge.
K.A. Kushantha Lahiru Priyashan
Wayaba University
This course is very useful to improve our PLC Knowledge as well as good opportunity for future jobs.
W.K.Lahiru Dhananjaya
Higher National Diploma in Engineering (Galle)
Great course for student who focus in the automation side.
T.M. Lasandi Rasanjalee Thennakoon
Department of Mechanical and Manufacturing Engineering, University of Ruhuna
Very important course for all mechanical engineering students. This corse make me very interesting about automation.
Edirisinghe G.D.R.P
Department of Mechanical and Manufacturing Engineering, University of Ruhuna
This is very good course and easy to understand. Very good teacher.
Veranjan Gayashan
Uva Wellassa University
Very understanding method of teaching. As a beginner to this subject area we got a big amount of knowledge about PLC programming and Pneumatics. Thank you very much Buddika sir for your knowledge sharing and the Websayura institute for providing this valuable opportunity.
Bhashitha Dilshan Wijerathne
Ocean University Of Sri Lanka, Department of Marine Engineering
The course was taught very simply in a way that everyone could understand. We also completed the course by providing all the software we needed and giving us maximum support.
W.Dasith Nelaka De Silva
Ocean University of Sri Lanka
Great course .
Chami Dimanthika Gangoda
Department of Mechanical and Manufacturing Engineering, University of Ruhuna
Absolutely fine, Interesting and valuable course. Thanks.
Paranavithanage Nadeesha Malka
Higher National Diploma in Mechanical Engineering (HNDE COL 15)
One of the best online caurse.
R.M.Madhuwanthika Rajini Dharmasiri
Ocean University of Sri Lanka
When I was attending this course, I haven't any idea about the SIEMENS PLC. But after attending
this course, ve got software and other relevant things about the SIEMENS PLC. Now I've
knowledge of the SIEMENS PLC. Thank You.
W.M.D.P. Karunarathna
Department of Mechanical and Manufacturing Engineering,
Faculty of Engineering, University of
Ruhuna
Teaching pattern is very clear to understand. solving problem in the class is very essential to
understand.
H.W.D.Indrarathna
Higher National Diploma in Engineering, Building Service Engineering
The best course for Automation new beginners.
Herath G.P.H.
Department of Mechanical and Manufacturing Engineering,
Faculty of Engineering, University of
Ruhuna
PLC සහ Pneumatic ගැන ගොඩක් දේවල් ඉගෙනගත්තා. සර් පැහැදිලිව සරලව හැම
දෙයක්ම තේරුම් කරලා දුන්නා. PLC සහ Pneumatic ඉගෙනගන්න ආස අයට මේක ගොඩක්
හොද course එකක්.
K.G. Banuka Harshana Premarathna
HNDE – Mattakkuliya
I think this plc course is very use ful for engineering students. Sir tough us plc very clearly and I
can understand easy. finally thank you sir give this chance for us.
W.M Madhawee Madhurangani Wanninayaka
ATI- Electrical engineering department
Actually, I;m so happy to get a chance to participate for this course. I was known about this
course from my friend. I learned about basic PLC , Pneumatic well in this course. Buddhika sir
who has a simple learning pattern. It was very important to learn & understand us easily about
PLC & Pneumatic that are a few of hard topic. I recommend this course for learning easily about
basic PLC & Pneumatic.
P.L Harsha Damayanthi Liyanage
Higher National Diploma in Engineering, Colombo 15.
This Course is really good. Even someone who knows nothing about plc can learn. If you do it
online, but we can ask again unknown things. Teaching system is very good and can easily
understand. Teaches even a small thing well. Software and course are very valuable to us. Thank
you sir and websayura team.
E.M.C.N.Thilakarathna
HND In Labuduwa,Galle
Good course and recommended for my friends
P.A Isuranga Sandun Abejeewa
Wayamba University
Actually very good teaching methods and we had already improved plc knowledge, i supposed to
do a physically classes for better experience ,thank you sir i hope join another new sessions
thank you
Sithija kaveesh hasakelum gunasena
Wayamba University
It was very interesting course. **HIGHLY RECOMMEND FOR BEGINNERS**
P.A.D.C.Pathum
Uva Wellassa University
*Presenting is very good *Easy to understand * Using good teaching method Thank you sir
H.N. Sahan lakranda
ATI Colombo / Mechanical
very interesting course.
A.M. Pasindu priyamantha Amarakoon
University of moratuwa (NDT)
I got many knowledge about PLC and Pneumatic… Thank you so much sir.
D.P. P. M. DHARMAPRIYA
ATI - Colombo, Mechanical Engineering
A very good session, I have learned many new things specially PLC and Pneumatics. The teaching is understandable and I’m focusing to practice more on these software’s specially the automation studio (I have also applied for the education version as well), Thank you. A very good session overall.
DINOJ SUPUNSARA
Uva Wellassa University , Science and Technology
It was a good and effective course. We collected a lot of new knowledge from it.
Lakmali U.A.D.N
Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, University of Ruhuna
Really very nice course. I learned the basics of PLC very clearly. Thank you sir
D.M.Keshan Chandima Dissanayaka
Uva wellassa University
This is a well-organized course, and I learned the basics of PLC very clearly. This will be a great help to work in the automation field. Thank you sir and websayura team!
S.M Marasinghe
University of Ruhuna-Department of mechanical and manufacturing engineering
Content of the course, lectures , lecture notes are good. Lecturer teach clearly for us.. I think this is good, i recommend this.
Kumara K.M.R
Faculty of Engineering University of Ruhuna
It was the best PLC programming and automation cause and got basic and more knowledge very clearly. The lecturer also conducted the cause well with good explanation.
Dharani Jayaweera
Mechanical and Manufacturing Department, Faculty of Engineering, University of Ruhuna
In the beginning i did not know anything about PLC & Pneumatics. Now I’m interest about the course. Really very nice course.
Rajapaksha Mudiyanselage Anuththara kavini lakmi Rajapaksha
Faculty of Engineering, University of Ruhuna
Well explained. If there a course for Advance level of plc appreciates
Harshana Senevirathna
NDT-University Of Moratuwa
Through this course, I have learned many concepts regarding PLC & Pneumatics. The course content and lecture slides are well prepared. The lecture taught well every concept very clearly. Actually, after following this course, I am in a good position to work with PLC & Pneumatics. I highly recommend this course to others..!
Nilantha Sajith
Wayamba University of Sri Lanka
it is very good plc cause. I improved my programing plc knowledge. I recommend this cause for students it very good.
Himanka Jayasingha Arambawela
K-tech Orugodawattha
Relay good course. It’s worth a lot for that price. Learned a lot about PLC and pneumatic.
K.L. Gihan Lasith Premarathna
University of Wayamba Sri Lanka
good course, well and clear explanation, I learned lot. Thank you sir.
K.M.Tharindu Malaka Leelarathna
Wayamba university of Sri Lanka
Good content. Keep it up.
Hansa Dinupa lakmal Jayasinghe
Wayamba University of Srilanka
Very helpful course, thank you sir
Wijesurendra W.P.N.D
Wayamba University of Sri Lanka
This is one of the best courses I have ever attended. I gained a very clear basic knowledge of PLC and Pneumatic.
Pasindu Madhusankha
Wayamba University of Sri Lanka, Faculty of Technology, Electrotechnology Department
This course was interested of improving PLC knowledge. I hadn’t even basic knowledge before i joined this course. Thank you.
J.G.Pamoda Devindi
Department of Mechanical and Manufacturing Engineering, University of Ruhuna
You present the lectures very well. it is very useful
MADAWALA MADDUMAGE CHAMINDU LAKPRIYA
University of Peradeniya
පාඨමාලාව ඉතාමත් හොදයි. Automation වලට තිබුන ආසාව තවත් වැඩි වුනා. ඉගැන්වීම හා ඉගැන්වීමේ ශෛල්ය ඉතාම හොදයි
G.G. Hasith Madumal Gunawardana
University of Peradeniya
Thanks so much for your very valuable course. This class has increased my interest in this field of study. Thank you for your wisdom, experience and personable presentation.
D.V.E. PERERA
HIGHER NATIONAL DIPLOMA IN ENGINEERING COLOMBO 15
The course was a great one. Thank you, lecturer and coordinators, as well. please arrange at least one day workshop for practical after this pandemic situation. thanks
J.M.Thushara Amarasooriya
IESL
REALY IT’S GOOD COURSE.LEARNED LOT OF THINGS.THANK YOU SIR
A.G.D.P.Madhushanka
TROPICOIR LANKA (PVT) LTD / MAINTENANCE
Highly recommend this course to anyone who want to learn the basics of PLC as well as pneumatic systems. The way of presenting lecture is much appreciated because it is easy to understand as well as for apply them in another application.
W.Isuru Sandaruwan
Uva Wellassa University,Department of Science and Technology
Very useful course and course content is very good.
P.R. Asanka De Silva
Sri Lanka College of Technology Colombo 10
First, I would like to thanks our lecturer who is Eng. Buddhika Weerasekara. and the course content is very well organized. So I will be recommended this course for beginners and professionals in the Automation industry. and Sir, I would like to wish you. And I will request from you, if you can conduct an advanced course in PLCs, HIM, and SCADA systems, it will be a great opportunity for us.
Chrishan Wanasinghe
Contrinex Ceylon Pvt Ltd, Process Engineer, Engineering Department.
The course that can lead to a successful foundation for plc and pneumatic control system. I Would like to express my heartfelt gratitude to Mr.Buddhika Weerasekara and the staff of web sayura for organizing such a valuable course. Thanks.
Kahawatta Gadara Anura Pushpakumara
BIO FOOD (FROZEN) FACTORY.
මෙම පාඨමාලාව බලාපොරොත්තු උනාටත් වඩා සර්ථක ලෙසට සර් සිදු කලා කියා මට සිතෙනවා . කිසිදු මූලික දැනුමක් නොමැතිව පාඨමාලාව ආරම්බ කල මා තුල PLC පිලිබද විශාල දැනුමක් මෙන්ම ඒ පිලිබද තවදුරටත් හැදෑරීම ආශාවක් හා උනන්දුවක් මේ පාඨමාලාව අවසානයේ මා හට ඇති වුණා. ඇත්තටම සර් උගන්වන කරුනු නිවැරදිම ක්රම වලින් කියලා දුන්නට සර්ට ගොඩක් ස්තුතියි…….
V.G.H NIRANJAN UDAYA KUMARA
University of RUHUNA faculty of Technology
අති සාර්ථක ලෙස මෙම පාඨමාලාව නිම කිරීමට අපට හැකි උනේ සර්ගේ මගපෙන්වීමෙන්. කිසිම දැනුමක් නොමැතිව පාඨමාලාවට සහභාගි වූ මා පාඨමාලාව ආරම්භයේ සිට අවසානය දක්වා කැමැත්තෙන් මෙන්ම ආසාවෙන් සහභාගි උනා. ටික ටික මේ පාඨමාලාවට උනන්දුවෙන් සහභාගි උනා. සර් example කියල දෙන ඒවත් පොඩි තැනේ සිට පිලිවෙලට කියල දුන්නා. ඇත්තටම සර් මේ උගන්වන ක්රමය අති සාර්ථකයි. සර්ට ඉදිරියටත් මෙම පාඨමාලා සාර්ථකව සිදු කිරීමට හැකියාව ලැබේවායි මම ප්රාර්ථනා කරමි. ගොඩක් ස්තූතිය සර්..
M.A.Tharindu Dilshan
University of RUHUNA faculty of Technology
It was the best online course. Also, the teaching method was great. It was an opportunity to learn every fact about PLC from A to Z more clearly.
S.A. Wickramanayake
University of Ruhuna Faculty of Technology
With the completion of this course I gained a lot of knowledge about PLC & Pneumatic systems. This course added a lot of knowledge to my profession and I learned a lot of unknown things about this subject. I was impressed Mr. Buddhika Weerasekaras’ teaching style and appreciate the easy way of presenting the lectures. While recommending this course to other students, I wish all the very best for the future of this Institution. Thank you Websayura!
Makavitage Jude Hasitha Perera
Institute of Engineering Technology Katunayaka /Mechanical Engineering / Marine Engineering Department.
කලින් PLC ඉගෙන ගෙන තිබුණාට තනියම logic එකක් හදන්න තරම් පුළුවන් වෙලා තිබුණේ නෑ. දැන් නම් තනියම logic එකක් හදන්න පුළුවන්. උගන්නන විදිය ගොඩක් හොඳයි.
M. CHAMODA HASARANGA
University of Sri Jayewardenepura
Thank you very much for this valuable course.
M. Aroshi Prabha Piumi Yapa
Uva Wellassa University of Sri Lanka
PLC and Pneumatic Programme has taught me from basics from PLC and Pneumatic Systems to end-end pipeline of Systems and how to think and obtain a solution by PLC perspective . Special thanks to Mr. Buddika sir for conducting the sessions and Websayura for organizing this programme.
Vidura Wijekoon
Department of Electrical and Information Engineering, Faculty of Engineering, University of Ruhuna
By following this course I could understand the basics of PLC Programming and Pneumatics Systems very clearly . Thankyou Sir for explaining the approaching concepts used to build up systems in a way that anybody can understand and explaining them simply. I think I cleared most of the doubts that I had on this, through following this course.
Hisara Navod Edirisinghe
Institute of Technology University of Moratuwa (ITUM)
This course is good for improving my skills in PLC and Pneumatic. And Sir explained theory and practical season well. I highly recommend this course.
T.K. Ravindu Chamalka Jayarathna
HNDE
Gives a clear idea about the basics of PLC and Pneumatic.
K.A Lakshan Jeewantha
University Of Moratuwa
It was a great opportunity for us to learn about PLC Systems and Pneumatic Systems
M.A.K. Induruwan
Institute of Technology University of Moratuwa
Course structure and explanation is very interesting
M.K.Nalaka Samarathunga
Institute Of Technology University Of Moratuwa
Absolutely superb course gather more knowledge about PLC programming and Pneumatic systems
M.T.S.Rathnayaka
Institute of Technology University of Moratuwa(NDT)
Thank you all for teaching us in well manner. though this course was done in online platform it was taught successfully. And again thanks for teaching lessons again and again until we could understand.
W.G.A.Deshan Sithuminda Morayes
Institute of Technology University of Moratuwa(NDT)
i tried since one year to understand plc and electronic wiring with relays using youtube. but i couldnt. i got to learn plc clearly using this course. this course is great
Kodikara Arachchige Sanchitha Deshan Kodikara Arachchi
Institute of Technology University of Moratuwa(NDT)
Good explanations. Good lecture notes. Exactly it was pretty nice session.
A K K Mihiranga
Institute of Technology University of Moratuwa(NDT)
Course elements are described well. Lecturer response to our problems are highly satisfied.
Yahas Kalhan Waduthanthri
Institute of Technology University of Moratuwa(NDT)
Great course got a clear idea about PLC and Pneumatic Systems. Providing simulation software and other software is a great thing. Lecturer is so friendly and taught the lessons superbly.
H. Pasindu Neranjana Kumarasiri
Institute of Technology University of Moratuwa(NDT)
Thank you so much for an amazing course! I learned so much and you made even the more complex topics interesting and easier to follow through real-world stories and case studies.
Ravihansa Sandeepana
Institute of Technology University of Moratuwa(NDT)
This is very useful course for Engineers . Ass I Think , All engineers and technologist must follow this course for their future task specially Mechanical Engineers
A.T.Jayananda
Maganeguma Plant Complex , Ganewalpola
The course contains really good and useful content. The explanations were excellent. Highly recommended for anyone who is interested in PLC and Pneumatic systems.
M.D.T. Bandara
University of Peradeniya
Excellent Course, Good Content and nice teaching. Thank you
Nadeera Ukwaththa
University of Peradeniya
First of all I must tell this course was met me by chance and then I found details regarding this course. Then I thought this will be great chance to improve my knowledge about PLC programming and pneumatic systems. So, now I am happy about my decision because I was able to improve my knowledge by today. The way of teaching is very much interesting and teaching pattern also better for student. So, I must thank all members of websayura team for giving this kind of chance to me. Best wishes for great journey websayura team.
M Pujitha Madusanka Thennakoon
Ethimale Plantation (Pvt)Ltd
Good course… It was very easy to understand the lesson because of the teaching method
M.K.W.Bandara
Higher National Diploma in Engineering 9
Course was very much useful. Got a clear idea about PLC programming. Thank you
A.P.V.PERERA
Institute of Engineering Technology, Katunayake
This is a great place to learn valuable online courses I like the teaching methods of the lecturers I got the best out of this course with my help with their knowledge.
A MOHOMAD ASLAM
Technical college Sammanthurai NCT Electrical Engineering.
It was a very interesting course. Although it is a Basic PLC and Pneumatic course, I gained a lot of knowledge on industrial automation. I should really admire the teaching methods of Eng. Buddika Weerasekara sir, which were very easy to understand and follow. I happily recommend this course to anyone with or without basic knowledge of automation and I’m looking forward to follow upcoming interesting courses here. Again, thank you very much Eng. Buddika sir and WebSayura Team.
A. T. D. Abeyratna
Ethimale Plantation Pvt Ltd
THIS COURSE WAS VERY IMPORTANT TO ME TO IMPROVE MY KNOWLEDGE. I’M HIGHLY RECOMMENDED THIS COURSE
A.CHATHUMINI CHAMIKA
IET KATUNAYAKE
Thank you for offering such an informative course and make it accessible for us. I found it very helpful in my work place activities and definitely enhanced my knowledge and skills related to PLC logic controllers & Pneumatic system.
S D PATHIRANA
Great Course with fully explained lessons in Sinhala medium. More valuable if you could do with physical practical lessons. Thankyou sir.
D H N BERNADGE
Institute of Technology University of Moratuwa
It was very easy to understand how to apply our logic in PLC and pneumatic systems. Our instructor was used simple tactics to explain all behind PLC and pneumatics…… Thanks for share your knowledge with us.
W Anushka Eroshan Premathilaka
SEAPL Automation
Excellent course and Excellent lecturer. Mr Buddhika Weerasekara is a great lecturer. He has conduct the course simply and clearly. Thank you.
Rashmi Weeraratne
SEAPL Automation private limited.
Thank you web sayura and buddhika sir for giving me lot of knowledge about PLC. I never find such a class like this. Wish you all the best for your future. thank you
A.Harsha Madhuranga De Silva
Homerlanka Industries(Pvt)Ltd.
This is a really good course.Teach very well From the bottom up. I think this is the best first course that anyone who wants to come into the field can do. thank buddhika sir and your institute.
G I UDAYANGA
SLPA
PLC සහ Pneumatic වල මූලික දේවල්වල ඉඳලම පැහැදිලිව කියල දෙන නිසා තේරුම්ගන්න පහසු වුනා..ගොඩක් ස්තූතියි සර්ගෙ කැපවීමට වගේම ආයතනයටත්..
P.K.Thakshila Tharanga
Advanced Technological Institiute
ඇත්තටම මෙම පාඨමාලාව ඉතාමත් වැදගත් පාඨමාලාවක්.ඉතා හොදින් කරුණු පැහැලි කරල දෙනව.සෑම දෙයක් ගැනම සරල තැන සිට පැහැදිලි කරනවා.
A.SATHYANGA VISHWAJITH GUNATHILAKA
I enjoyed the course and learned a lot from it. The content is well designed and focused on practical situations, easy for intermediate level of students to follow. The lecturer has good knowledge on the subject so students can understand well. Specially recommend for undergraduate and after A/L students who are interested in PLC programming.
A. Nileesha Malshani Ranasinghe
South Eastern University of Sri Lanka
Lectures are very clear and the course content is really helpful. Thank you
M.M.P Ilangasingha
Macktiles Lanka (Pvt)Ltd
This is a great course for those who want to learn plc from the beginning. One of the highlights of this course is that even those who do not know anything can learn from scratch as every lesson is taught very clearly.
Athauda Arachchillage Hashini Vindya Athauda
The Open University of Sri Lanka
This is very important course and I got good knowledge about plc and pneumatic.
M.I.M Wijerathna
HNDE-Electrical Engineering Jaffna
I think this is a very good course for those who are expecting to start learning PLC and pneumatic systems. The way that the lectures were conducted is very clear and easy to understand. Exercises that were given helped to improve the things that I learned, and understand the applications of PLC and pneumatic systems in the real world.
M.S.S Madushani Dissanayake
Electrical and Information Engineering, University of Ruhuna
Firstly Thanks for the coordinate Buddhika sir.This course is very important to my future carrier.Hope to join advanced plc course also
M Sanjuna Kasun Karunapala
University of Ruhuna Faculty Of Technology
Very good course to me
B. Ravindu Lakmal Jayasekara
University of Sri Jayewardenepura
supiriyata ugannanwa sir…Advanced course ekata aniwaren enwa ..Thank you sir
kasun maduranga
University of Moratuwa
This course helped me to get a basic knowledge about PLC. I was able to get a very clear understanding. if a practical section is added, this work can be done successfully.
Thevan Peiris
Advanced technological Institute-Jaffna(HNDE-Jaffna)
It is a very good course. I learnt many new things from this course. Thank you for the hard work. Good luck!
Vijini Wathsala
Lankem Ceylon PLC
The teaching method and the lecture notes are excellent. So it was easy to understand. This course was very helpful in achieving my career goal.
L.A. Sasanjaya
Faculty of Engineering - University of Peradeniya
This course was very important and were able to understand the explanations. there was no difficulty in imparting and acquiring knowledge after completing the course online. thank you Sir
Shehan Tharindu
Faculty of Technology, University of Ruhuna
A very good course to start from the basic.
Dilumi Weerasooriya
Institute of technology, University of Moratuwa
Very good course. Gained a great deal of knowledge